Our new NoWet green clean product meets all of the criteria listed below to be considered a "Green" product... There is no other "Waterless" vehicle care product that can make these claims... 1. How is NO-WET Waterless Car Wash and Wax Superior to Traditional Car Washes?
|
|
|
1. How is NO-WET Waterless Car Wash and Wax Superior to Traditional Car Washes?
- NO-WET Saves TIME and MONEY
- Cleans, shines and protects ALL paints, clear coats, rubber, vinyl and plastic surfaces. Chrome, fiberglass, will even remove stains from the inside of your vehicle, rugs, seats, headliners etc...
- No need to buy expensive car wash soaps, waxes, sealants, vinyl cleaners, etc...
- Cleans, shines and protects all in one, easy application
2. NO-WET Waterless Car Care Products Protect the ENVIRONMENT
- 100% Earth Friendly. Made From All Organic Ingredients
- Contains NO Kerosene, Harmful Silicones or Abrasive Agents
- Can Save Millions of Gallons of Water on a Daily Basis
3. What Is NO-WET?
NO-WET waterless car wash and wax is a Revolutionary STATE OF THE ART Concept in WATERLESS WASH, WAX, POLISH & SEALANT. NO-WET contains 17 major active ingredients plus the finest CARNAUBA WAX, KAOLIN CLAY & POLISHING AGENTS AVAILABLE! NO-WET contains NO KEROSENE, and is the only waterless car wash cleaning product that can make these claims!
4.Why Do We Use Carnauba Wax and Kaolin Clay In NO-WET?
Being a natural plant by-product, that will not react with any paint. Carnauba provides a very hard film over your car's surface to protect against airborne contaminants such as acid rain residue, catalytic converter emissions, bug tar, road grime, salt and bird droppings etc. etc. Carnauba also dramatically reduces paint oxidation by diffusing (refracting) UV and infrared radiation from the sun, which can oxidize and dull your paint finish. NOTE: Pure Carnauba is harder than concrete. KAOLIN Clay is a surface preparation that smoothes the paint before it's buffed or waxed. NO-WET WASHES, WAXES, POLISHES & SEALS any non-porous surface you apply it on, without the need of our most precious natural resource WATER!
5. What Can I Use NO-WET On?
Cars, Cycles, Boats, Glass, Chrome, Fiberglass etc, etc. Reduces friction on skis, sleds, & snowmobiles & protects from the elements. When used on windshields water will bead & bounce off, just about eliminating the need for wipers, truly amazing! Also great for a quick shoeshine! Also to clean eyewear, safety shields, optics, TV's and monitor screens, NO-WET waterless carwash and wax repels dust and fingerprints. Minimizes small scratches and swirl marks and makes them optically clearer. Race drivers, athletes, and fire fighters will appreciate the clarity and the anti-static that keeps helmet shields clear, clean and dust free much longer.
6. How does NO-WET Work?
When NO-WET waterless car wash and wax is MICRO/MISTED over a soiled area, our exclusive formula has the unique ability to encapsulate and emulsify the dirt particles, lifting them off the surface, (thus no scratching) preparing them for removal by the simple swipe of a clean 100% terry towel. No need for soap, buckets, hoses, no more mess! 32 ozs. of NO-WET will wash, wax, polish & seal on average 12/16 autos! JUST ONE 32 oz. BOTTLE of NO-WET WILL SAVE ABOUT 2000-3000 GALLONS OF WATER!
7. What Does NO-WET Do?
Aside from leaving your vehicle looking new, NO-WET waterless carwash prevents premature aging of your vehicle by sealing your vehicle with a UV protective coating, when applied on vehicle glass NO-WET also prevents premature fading of interior as well, due to the harmful effects of the Sun! NO-WET also REMOVES OXIDATION (dull white film) from your vehicle.
8. Will NO-WET Harm My Vehicle?
NO! NO WET contains NO ABRASIVE OR SILICONE AGENTS!!
9. Can I Use NO-WET On Plexiglass?
Yes. NO-WET contains No Kerosene or abrasive agents. NO-WET will not scratch or haze the plexiglass.
10. Will The Carnauba Wax Build Up?
NOWET is formulated to leave only a certain thickness of wax, no matter how many "coats" you apply.
11. Who Should Use NO-WET?
Everyone who really cares and loves his or her vehicle will want to use NO-WET, and especially those people who are concerned about our future WATER supply, millions upon millions of gallons of WATER are wasted everyday by people just trying to keep their vehicles looking new These millions upon millions of gallons of dirty, soapy, oily WATER will then filter down into our surface water table and contaminate this water source Until now there has been no substitute for WATER, but NO WET WATERLESS has now developed an environmentally friendly ALTERNATIVE FOR WATER, that protects our vehicles and keeps them looking new!
DIRECTIONS AND APPLICATION
Each time before filling applicator shake filler bottle approximately 20-30 seconds, do this by holding filler bottle UPSIDE DOWN and twisting your hand vigorously from left to right. Also follow the same procedure before using filled applicator. It is very important to make sure all ingredients are completely mixed.
To ensure a good spray, DO NOT fill the applicator bottle past the fill line, fill to about 1/2 inch below fill line. Using the pump cap, press up and down approximately 20 times until a resistance is felt, (cap will rise about 1/2 inch) continue to pump the applicator during applications with one or two pumps after each spray.
Spray mist over soiled area using a sweeping motion, keeping the applicator about 18-24 inches from surface, covering about 3-4 sq. ft. each time. Let set up for about 5-10 seconds, then wipe with first towel in ONE direction, (you are now picking up the dirt that is floating in the NO-WET solution) first easy, then a little harder. As hazing appears, use second terry cloth, or the NO-WET Microfibre Towel and buff in circular motion to a clean and gleaming finish!
PLEASE USE COMMON SENSE; IF DIRTY AREA IS CAKED AND PACKED, KNOCK OFF EXCESS BEFORE MICRO-MISTING
When using to clean glass, chrome etc . wipe product off right away! When it comes to glass, LESS IS BEST!
Same instructions can be used for any other Nonporous surface re: RV's inside & outside. NO-WET can even be used to clean carpets and fabrics...CYCLES, BOATS, WINDOW GLASS, SHOWER STALLS, or what ever you can think of!
A quick review of the directions:
- Shake bottle vigorously for 20 - 30 seconds
- Pour into exclusive Micro-Mist applicator to about 1/2 inch below fill line
- Pressurize bottle by "pumping" cap until resistance is felt
- Spray a light coat of NO-WET on the surface using a sweeping motion
- Wait 5-10 seconds as the NO-WET emulsifies and lifts the dirt from the surface
- Now use the first towel, gently rubbing in one direction to remove dirt and grime. As filmy haze appears, use the second cloth or the NO-WET Microfibre towel and buff in circular motion to a clean and gleaming finish!
If the MICRO MIST APPLICATOR seems clogged or doesn't spray properly - even after a thorough shaking - turn the bottle upside-down and depress the spray valve for 5-10 seconds to expel air only. Then pump additional air into the bottle and retry. Repeat this procedure two or three times, if necessary.
This also should be done after every time you use the applicator so no wax settles in the applicator tube...it is best to store gallons on their side until half empty...to mix gallons turn upside down...hold with two hands and twist hands front to back.
OUR NEW NOWET GREEN CLEAN PRODUCT MEETS ALL OF THE CRITERIA LISTED BELOW TO BE CONSIDERED A “GREEN” PRODUCT…
THERE IS NO OTHER “WATERLESS” VEHICLE CARE PRODUCT THAT CAN MAKE THESE CLAIMS…
BY USING NOWET WATERLESS PRODUCTS APPROXIMATELY 55,000 GALLONS OF VALUABLE OF DRINKING WATER IS A SAVED DAILY IN BRITAIN…
- Must be free of any known human carcinogens, mutagens or teratogens
Contains no known or suspected carcinogen, mutates, dermatogens.
- Must not contain compounds or substances, which cause or contribute to the creation of atmospheric greenhouse gases, ground level smog or ozone depletion
Does not contain any fluorinated or chlorinated hydrocarbons.
- Must not be corrosive to skin or inanimate surfaces.
The PH is not considered corrosive to skin or inanimate objects.
- Must not be delivered in single use aerosol cans or cans using ozone depleting propellants
It is non-aerosol.
- Must not contain petroleum-derived or petrochemical blended fragrances
Does not contain any petroleum or petrochemical derived fragrance.
- Must not contain heavy metals that are toxic to humans, animal life or the environment
Does not contain any heavy metals.
- Must not contain petroleum distillates unless no natural alternative is available, and then only if the distillate meets the human safety and environmental profile outlined herein.
Does not contain any petroleum-based hydrocarbons.
- Should not be combustible below 150ºF
There is no flash point up to boiling.
- Must not contain chlorine, chlorinated or brominated solvents
Does not contain any of those compounds.
- Must not contain compounds that persist or bio-accumulate in human or animal tissue or in the environment
Does not contain any of those compounds.
- Must not contain volatile organic compounds (VOC) at levels exceeding the limits established by the Southern California Air Quality Management District Resources Board for the applicable product categories. Products must not be listed on the hazardous air pollutants list of the Environmental Protection Agency
The product is VOC compliant.
- Should be readily biodegradable at greater than 90% in thirty days without the need of being run through a municipal effluent treatment process. If not biodegradable due to inorganic content the ingredient must be chemically inert.
The product is biodegradable.
- Should be obtained or derived from replenishable natural (plant) sources wherever possible
Yes (Proprietary Sources)
- Should be as concentrated as possible to green the supply chain
The product is ready to use.
- Products should be capable of being dispensed through automatic systems in order to reduce user and environmental contact
It is a consumer use product.
- Should have a pH level between 4 and 9 wherever possible
The PH level is 7.8 - 8.4.